There are a lot of things you can do to extend the life of your car from gas struts for car to oil changes, but it takes a bit of work. The following is a checklist of some basic services that may need to be performed on your vehicle regularly.
Check and top up fluids as necessary
Check the fluids. It’s always a good idea to check and top up all of your vehicle’s fluids—including oil, coolant, brake, and transmission fluids. You can find comprehensive guides online for what to look for in each of these areas. If you’re not sure if you’ve got enough oil or not, we recommend using an app like [this one](https://www.yourmechanic.com/app) that will let you know how much fuel is in your tank at any given time by taking photos of it with your phone camera.
If something doesn’t look right when checking out your car’s vital signs (like low coolant), bring it in to get checked out by a professional before driving so that nothing goes wrong while on the road!
An auto electrician is a technician who repairs, troubleshoots, and installs electric components of your car. You can find a good cheap auto electrician easily in your area. They are used for two main purposes:
- To diagnose electrical problems in your vehicle
- To solve them
Oil changes – at least once every six months or 5,000 miles.
Oil changes are an important part of any car’s regular maintenance. The oil filter helps keep the engine clean and lubricated, but it can become clogged with dirt and debris over time. Not changing your oil filter will cause your car to use more oil than it should, which results in higher costs and reduced engine life.
Oil filters should be changed every 6 months or 5,000 miles (whichever comes first). When you change your oil filter, make sure that you also change the motor oil for your vehicle; always begin with new motor oil when performing a routine maintenance checkup or when experiencing problems with your vehicle. You can find out how much each service costs on our website here: https://wwwanycarxmendealercom/costs_and_pricing/
It is important to change your vehicle’s motor oil when it is warm because this allows any moisture trapped inside the engine to evaporate before draining old fluid onto new parts during the installation of new fluid (which would cause corrosion). It is also preferable if conditions are hot outside so that temperatures inside engines don’t drop too low while waiting for fresh fluid to reach those temperature sensors before resting again.
Hydraulic systems are used to operate power steering and brake systems, so when they fail, they can be dangerous. A leaky hydraulic system may cause your car to pull to one side or the other while driving. Hydraulic systems can also fail, requiring you to replace them entirely instead of fixing the leak.
A hydraulic system repair is not usually covered by a manufacturer’s warranty because these types of repairs are considered wear and tear on an automobile. If you do have a problem with your hydraulic system, contact the hydraulic repair service to take care of it for you!
Engine tune-up – every four years.
- Tune-up: This includes spark plugs, wires, and distributor caps. It also includes a fuel filter and air filter. It’s important to keep your car running efficiently.
- Transmission service: Think about a transmission service if you have more than 100,000 miles on your car.
- Timing belt replacement: A timing belt is an important part of your car’s engine that helps control valves at the right time for proper combustion in an internal combustion engine (ICE). If it breaks while driving, it could cause serious damage to the engine or even lead to its failure. At around 100,000 miles most cars require a timing belt replacement for $1,200-$1,500 depending on the make and model of the vehicle
Transmission flush and filter change – every three years or 45,000 miles.
The transmission filter cleans the fluid that is sent to your car’s transmission. The filter also keeps small pieces of metal from getting into the gearbox and causing damage. If you change your oil regularly, you should also change your transmission filters to extend their life. You should do this every 30,000 miles or so—or sooner if you notice any problems with shifting gears in your car.
Transmission flush and filter change – every three years or 45,000 miles
If you have a manual transmission, it’s important to check the level of transmission fluid frequently; even if it looks like there isn’t any on top of the dipstick (the long stick used to check how much fluid is left), there may still be some inside. It’s easy enough for most people who know how to drive stick-shift cars: just pull over somewhere safe when driving on highways; find a flat surface nearby so that no one will try driving over it while parked (like grassy fields); put on gloves because there could be some hazardous chemicals present due to previous leaks before noticing them (again) which can cause skin irritation; locate where exactly these leaks are coming from using common sense plus experience driving without worrying too much about where they might end up going until they’re fixed properly by professionals such as ourselves at [INSERT COMPANY NAME HERE]. Then finally take off all four tires’ wheels using spanners before draining out any remaining contents through their openings located underneath each tire near where they meet up with each other underneath either side paneling–you’ll see those openings once everything has been removed successfully!
Replace spark plugs and wires – every four years.
When you are replacing your spark plugs, it is also a good time to replace your wires. Wires can wear out and even cause misfires that may damage the engine. Some people prefer to replace them together every four years or so as this gives them a chance to inspect what else may need attention. Spark plugs should be replaced at least once per year and you should always use the specified type for your engine types, such as platinum or iridium-tipped spark plugs (depending on what kind of car).
A few tips: when replacing plugs, do not touch them with bare hands; instead use an anti-static mat or another device that will keep static electricity away from the new ones so they stay clean. Also, make sure you buy high-quality ones made by reputable brands such as Bosch or NGK; cheap ones tend not to last very long before needing replacement again!
Replace fuel filters – at least once a year.
Fuel filters should be replaced at least once a year. If your car is driven infrequently and/or in dusty conditions, you may want to replace the fuel filter more frequently. A clogged fuel filter can cause your engine to run poorly or lead to a breakdown altogether. In general, you should change your fuel filter every time you change your oil—and that’s probably what most people do anyway.
Radiator flush – every two years.
When your car is working hard, the radiator cools the engine by circulating a mixture of water and antifreeze through its system. Over time and use, this mixture can become clogged with dirt, rust, and other contaminants that keep it from doing its job properly.
A radiator flush is a simple maintenance procedure that removes those contaminants from the radiator’s system so it can work properly again. It’s recommended to do this every two years or 24,000 miles (assuming you have your car serviced at regular intervals).
The best time of year to do this is spring or fall when temperatures aren’t too hot or cold because you don’t want people standing out in the cold while their cars are being worked on!
Brake fluid flush – every two years.
Many car owners don’t realize that their brake fluid is just as important as the oil in their engine. It’s responsible for making sure that your brakes work properly and that they stop smoothly when you step on them.
But what happens if you don’t change the fluid? Over time, it gets contaminated with moisture and starts to degrade. The result is a decrease in braking efficiency; it’ll take longer for your car to stop when you press down on the pedal.
To prevent this from happening, make sure to get regular brake system inspections and have your brake fluid flushed out every two years or so—either at an auto shop or by using a DIY kit from Amazon (Amazon link). This process should only take about 15 minutes and costs around $50-$60 depending on where you go!
Power steering fluid flush – every two years.
Power steering fluid is a mixture of water, additives, and oil. The fluid helps to reduce the power steering pump’s load and it also provides smooth operation of the pump.
The power steering system uses hydraulic pressure from your engine to assist in turning your wheels by way of a remote-mounted pump driven by belts or gears. When you turn your wheels, this hydraulic pressure moves through hoses that connect the pump to a cylinder inside each front wheel hub assembly (hub). As you turn your wheels, they move up and down quickly while remaining parallel with each other; this action compresses or extends springs that are connected between each end of the cylinder—thus creating resistance against turning motion. If there were no resistance between these ends as they moved up and down quickly while remaining parallel with each other; this action compresses or extends springs that are connected between each end of the cylinder—thus creating resistance against turning motion. If there were no resistance between these ends as they moved up and down quickly while remaining parallel with each other; this action would cause them to separate from one another by thousands of pounds per square inch (psi).
Fuel injection cleaning service – at least once a year.
A fuel injection cleaning service is a great way to keep your car running smoothly and prolong its life. The fuel injection system provides fuel to the engine, and if this system doesn’t work properly, your car will not run as efficiently. A fuel injector cleaning is an easy procedure where a technician cleans your fuel injectors using special equipment. You can expect this service to cost between $150-$300 depending on how many cylinders need to be cleaned (most vehicles have 4-8).
The average time it takes for a professional mechanic at an auto shop or dealership to complete this process is about 30 minutes per vehicle, but some mechanics can do it in less than 20 minutes! If you want peace of mind knowing that everything inside your car has been checked out by a professional before getting back on the road again then consider asking around for recommendations or contacting local shops near you!
Cooling system pressure test – at least once a year.
- When to do it: At least once a year.
- How to do it: The cooling system pressure test requires you to use a pressure gauge and find your car’s radiator cap (it’s in the engine compartment, right near where you would normally put water). Then, look at the area around your engine while someone else applies at least 50 psi of air pressure into your cooling system via their cylinder or a shop-pressurized air source. This should be done without operating the car or turning on any fans or anything else that could cause excess heat while testing. You’ll then watch for bubbles coming out of various parts of the system when this happens.
- What to look for: Bubbles will indicate an issue with either coolant flow or internal leakage within one part of the cooling system—either way, it might be time for repairs if your car overheated recently as well!
- How to fix it if you find a problem: If there aren’t any bubbles present after this test has been completed successfully by both parties involved (you with your gauge and friend/family member doing some heavy lifting), everything is probably okay! However, if there are bubbles present anywhere within any part of your cooling system—including but not limited to radiators themselves–then work will have to be done before driving again because having water mixed with air means rust forming inside pipes which isn’t good news at all considering how expensive these repairs can get depending on how fast they need completing versus how long they’ve been leaking internally without being discovered until now…
# Car Services Checklist to Extend Your the Life of Your Car
The following is a checklist of car services that should be done regularly, at least annually:
- Check and top up fluids as necessary.
- Have an auto electrician check your battery, alternator, and starter.
- Get your air conditioning checked for leaks or other problems.
- Have your tires rotated every 6-12 months or 5-6 thousand miles to keep them from wearing unevenly? This will save you money on new tires by extending your life! You can ask us about our tire discount program if you are interested in saving even more money! Also, remember to always use the correct tire pressure suggested on the side of the tire itself – this will reduce any unnecessary wear on those expensive rubber treads over time too!
Hopefully, you’ve found this list of car services helpful. If you want to save yourself some time and money in the future, it might be worth setting up a regular service schedule with a trusted mechanic like this mechanic in Canning Vale or a garage. They will know your car best and be able to recommend any necessary work before it becomes an emergency.